A shocking bill
When Andriy K. opened his heating bill in winter, he could not believe his eyes. 15,700 UAH per month - and that was just for a 120 m² house. All the energy efficiency measures have already been taken: new windows, insulated walls, but the result is zero. The situation seems hopeless. However, there are people who no longer suffer from "heat" tariffs. They have found a solution - and it is called Mycond MCU-YH.
Hidden enemies of your wallet
- Technologies from the last century: gas boilers, solid fuel stoves, electric heaters consume a lot of energy with minimal efficiency.
- High tariffs and instability: suppliers regularly revise prices, leaving consumers in limbo.
- Lack of automation: conventional systems heat regardless of the temperature outside or the actual load, i.e., in vain.
- Heat loss due to an outdated system: pipes that heat the basement, boilers that constantly overheat water without adapting to the user's needs.
- Dependence on one heat source: if it breaks down, you are left without heat.
- Accidents and supply interruptions: centralized heating does not give the user flexibility. One failure and the house is cold.
- Non-transparent calculations: It is difficult to predict costs, especially when tariffs are rising even during the non-heating season.

Solution: Mycond MCU-YH - a technology that works
What is a heat pump? It is a system that "pumps" heat from the environment into your home. It heats in winter and cools in summer. And all this with 3-5 times less consumption than traditional boilers. That is, you pay less and get more.
Advantages: why Mycond MCU-YH?
- Flexibility of modules.
- Power and economy: COP up to 4.43.
- Reliability and automation: EXV, RS485, self-diagnostics.
- Safety: no open flame, overheating protection.
- Easy installation and maintenance.
Practical cases: who has already saved money
- ✔ Business center in the capital: 5 MCU260YH modules - 56% savings.
- ✔ Private cottage of 140 m² - costs reduced from 28,000 to 13,000 UAH/season.
- ✔ Family hotel - more than 170 thousand UAH savings per year.
Comparative table: before and after
Indicator |
Before (gas boiler) |
After (MCU-YH) |
Expenses for the season |
25 000 UAH |
11 500 UAH |
Service maintenance |
3 times/season |
1 time/year |
Automation |
Minimal |
Full |
Noise level |
High |
Low |
Reliability |
Average |
High |
Additional cooling |
No additional cooling |
Є |
Security |
Limited |
Full (without fire) |
Additional features: integration and hybrid solutions
Mycond MCU-YH is not only a stand-alone system. It can be easily integrated into multi-component power systems. The most popular solutions:
- Integration with solar collectors: during the sunny season, the system operates with virtually no additional energy consumption from the grid. This is ideal for private homes and small offices.
- Combination with solid fuel or gas boilers: the heat pump can operate as the main source of heat, and the boiler can operate as a backup. During periods of peak loads or ultra-low temperatures, the system automatically switches to the auxiliary source.
- Connection with smart home systems: you can control heating, cooling and ventilation from your smartphone or tablet. Remote control, fault notifications, consumption monitoring - all this ensures maximum control.
- Use of energy storage: Excess electricity, for example from solar panels, can be stored in batteries and used at night or at times of peak electricity costs.
This combination allows for record efficiency, stability, and complete energy independence. This is important for both environmental awareness and business strategy.
Environmental impact: heat without harming nature
Mycond MCU-YH is the choice of those who care about the environment. The system runs on R410A freon, which does not deplete the ozone layer and is energy efficient. It does not produce carbon monoxide or coal smoke, does not require fuel combustion, and does not create ash or soot.
By using the ambient air as an energy source, the heat pump reduces the load on power plants and reduces CO₂ emissions into the atmosphere. It is a safe solution for:
- urban areas where the installation of open combustion sources is prohibited;
- ecological settlements and houses with GreenBuilding certificates;
- companies seeking to receive bonuses for environmental responsibility (LEED, BREEAM);
Each installed MCU-YH system is a minus of tens of tons of emissions per year. It's not just about saving money - it's about contributing to clean air for future generations.

Safety and certification
Safety is one of the most important aspects when choosing a heating system. Mycond MCU-YH has a multi-level protection system:
- Phase control: automatic shutdown in case of incorrect connection or breakage of one of the phases.
- Compressor protection against overload, overheating, power surges and frequent switching on.
- Flow relay: prevents the system from operating without a sufficient amount of coolant, which prevents overheating and accidents.
- Thermal sensors: monitor all key areas and trigger an emergency shutdown in case of a threat.
All components are certified in accordance with international standards CE, RoHS, ISO 9001, which confirms their quality and safety.
In addition, the system has been tested in extreme climatic conditions, which confirms its resistance to temperature, humidity, and voltage fluctuations. This makes Mycond MCU-YH a reliable choice for residential and industrial facilities.
How to start saving money: a guide for you
Getting started on the path to economical heating with Mycond MCU-YH is easier than it sounds. Here is a step-by-step guide to help you:
- Assess your facility: determine the floor space, type of use (residential, commercial, etc.) and existing heating or cooling systems.
- Contact an authorized representative or an installation organization: experts will help you choose the model that best suits your needs.
- Request a free consultation: experts will calculate the heat loads, draw up an individual connection scheme, and calculate the potential savings.
- Agree on a commercial offer: get a clear picture of the cost, installation schedule, service and warranty.
- Sign the contract and schedule the installation: the system is installed in 1-3 days, without complicated approvals and interventions in the building structure.
- Run the system and enjoy the result: automatic control, stable temperature, no cost overruns and accidents - all this will become the new normal in your life.
Don't delay. You'll see a real difference in your bills in the first heating season. Those who have chosen Mycond MCU-YH do not return to old solutions anymore.

The secret of economical heating is not only in insulation. It is in the right choice of heat source. Mycond MCU-YH is the answer to all modern challenges: tariff, technical, and environmental.
- Up to 50% savings in the first season
- Full control over the microclimate
- Predictable costs and quick payback
- A new standard of energy efficiency, proven in practice
Start saving not tomorrow, but today. Take the first step towards heat that works for you.